Reply With QuoteYou need a special adapter cable on a GM OBD I scan tool to read codes on
some of these - they have an OBD II connector, but still use the OBD I
(ALDL) communications protocol.
--
Robert Hancock Saskatoon, SK, Canada
To email, remove "nospam" from ca
Home Page: http://www.roberthancock.com/
"asadi" <com.invalid> wrote in message
news:bnm18u$o1i$17.184.100...
+ Reply to Thread
Results 1 to 4 of 4
GM / General Motors: OBD ll connector-OBD l compliant but with SIX wires....
-
LinkBack
LinkBack URL
About LinkBacks- Bookmark & Share
- Add Thread to del.icio.us
- Tweet this thread
- 10-28 02:16 PM #1asadiGuest
OBD ll connector-OBD l compliant but with SIX wires....
....and that means I can't use a jumper wire to get a read out. Auto Zone
gets a 'link error' when they try to read it with their hand held scanner.
Any body know of a way that I can read it or do I have to go somewhere and
pay the man.
john
- 10-29 03:43 AM #2RobertGuest
Re: OBD ll connector-OBD l compliant but with SIX wires....
- 10-30 06:24 PM #3SteveGuest
Re: OBD ll connector-OBD l compliant but with SIX wires....
......and then you have the 1995 Monte Carlo's with the 3.4L DOHC......ALDL
(OBD I) connector, but an OBDII computer.
Steve
"Robert Hancock" <ca> wrote in message
news:TzHnb.210673$..
Zone
scanner.
and
- 10-31 02:28 AM #4BoboGuest
Re: OBD ll connector-OBD l compliant but with SIX wires....
your gonna hate to hear it, but the only way I know of to read the hybrid
split year is with dealer equipment... I havn't seen an aftermarket setup
that makes the time to set up a unit to read this... too few models... Bobo
"asadi" <com.invalid> wrote in message
news:bnm18u$o1i$17.184.100...
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts