Reply With QuoteA clip holds it in.
Remove the 4 bolts holding the diff mount up to the body. Remove all the cover bolts. 8 if I
remember right. Pop the cover off but have a drain pan under it!. Look at the spider side gear for
the side you need to pull the axle on. Have fun pulling the clip.
<nw> wrote in message news:com...
+ Reply to Thread
Results 1 to 3 of 3
Mercedes-Benz: Need HELP> Removing Passenger Side Rear CV Axle /300D turbo
-
LinkBack
LinkBack URL
About LinkBacks- Bookmark & Share
- Add Thread to del.icio.us
- Tweet this thread
- 10-14 02:53 PM #1nwGuest
Need HELP> Removing Passenger Side Rear CV Axle /300D turbo
Hub side is freed , but does the differential side have clips or bolts
inside the housing or is it just pressed.I don't want to try prying it
out for fear of doing any damage. --TIA---NW
- 10-15 02:26 AM #2KarlGuest
Re: Need HELP> Removing Passenger Side Rear CV Axle /300D turbo
- 10-15 02:30 AM #3Wan-ningGuest
Re: Need HELP> Removing Passenger Side Rear CV Axle /300D turbo
I believe W123 has the clip inside differential housing. Never work on one but that is my memory. I am sure early W126 still uses clips and later (around 86 or 87) are bolted from outside.
nw wrote: Hub side is freed , but does the differential side have clips or bolts
inside the housing or is it just pressed.I don't want to try prying it
out for fear of doing any damage. --TIA---NW
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts