Forum: Jeep

Front reciever is cheaper and more useful. I got one for my 89 Cherokee from drawtite. I got mine from e-trailer.com and I am very satisfied. ...

In some of the newer I6's there is a plate with seals that the oil filter screws onto. My 91 I6 screws directly into the block... anyhow there...

NP Lori - you managed to drive Mike nutzo in the other group, lol. Glad to see you have it figured out now, and welcome to the groups - these are a...

Hagrinas Mivali wrote: > tre wrote: > >>Rare opportunity to snag some discontinued subs. >> >>Two 8" JL Audio 8IB4 for free air, infinite...

"YouGoFirst" <com> wrote in message news:wDxwe.1048303$ops.worldnet.att.net... > Have you checked out the switch or sensor that activates it? > >...

jimi wrote: > Is that an offer or are you just flappin your cyberjaws? > Jim > "Marc Sebens" <rr.com> wrote in message >...

>> >>>I know this sounds like I'm an weak idiot, and maybe I am, but I'm having >>>the hardest time simply putting up the soft top. I have a used...

If you are replacing a top for a Wrangler the only one to use is a Bestop. They are the manufacturer for the OEM top as well. Larry "Nat...

I eventually just drilled them out. Had the wrong kind of bit before.. got a new one and each bolt took like 15 seconds. On Tue, 21 Jun 2005...

E N D L E S S R O A D Road Chatter XXXV Shop: 301-497-0369 FAX: 301-497-3690 com www.endlessroad.com """"""""""""""""""""""""""""""""""

how long have you had this cherokee??? i have 96 cherokee sport i do my own oil changes and my dipstick will show over filled but i do not think it...

It's on the right side of the engine. Below the heads half way back on the block. Has 2 wires coming from it and 1 bolt holding it in position.

AND what I see is some people have NO sense of humor... I accept your apology. "Andy" <com> wrote in message news:cDXqe.41092$.. >...

I have found a solution, albeit not nearly as convenient as Coasty's. I hope this helps anyone whose drain tube is not visible through the...

Exactly my point. They are there only for looks. "Mark Sellers" <com> wrote in message news:com... > I suppose it might be a "looks thing" for...

"DollarBill" <net> wrote in message news:com... > "DollarBill" <net> wrote in message > news:com... > > I've been told it's the crank position...

John J Ernst proclaimed: > The reason that your tire pressure is set at 50psi is that your tires have a > thicker sidewall then what is found on...

There's no lack of "rubbery" wires under this hood. However none leading into the distributor. No damage, charring or discoloration on the wires in...