Reply With QuoteI just wanted to commend you for taking the effort to protect yourself.
There are a lot of fools that still think detectors don't work.
Good job.
--
Team EuroMeko
---------------------------------------------
http://blackie.bounceme.net
"Adam" <net> wrote in message
news:bsdc4k$bi1je$news.uni-berlin.de...
+ Reply to Thread
Results 1 to 7 of 7
Nissan: Install radar dector in 2000 Pathfinder
-
LinkBack
LinkBack URL
About LinkBacks- Bookmark & Share
- Add Thread to del.icio.us
- Tweet this thread
- 12-24 11:48 PM #1AdamGuest
Install radar dector in 2000 Pathfinder
I'd like to hot-wire install a Valentine 1 into my 2000 Pathfinder. I
know how to do it when wiring from the fuse box (I hook it into the
ignition so it goes on/off with a turn of the key). But now I'd like to
hot wire into the overhead console. If this is possible, how do I get
the console off and which wires in the overhead are attached to the
ignition? Thanks,
Adam
--
To email, erase "forgetit"
- 12-24 11:59 PM #2iBuyMinis.UsGuest
Re: Install radar dector in 2000 Pathfinder
- 12-25 01:36 AM #3Chuck.KGuest
Re: Install radar dector in 2000 Pathfinder
In article <bsdc4k$bi1je$news.uni-berlin.de>,
net says...
I can't remember that far back to doing my y2k Pathy, but on the '02
and 03 models I had/have, there is a phillips screw inside the
sunglass drop down. After it's out, there are 4 snap/hooks that are
just press fit. Work a screwdriver under the edge of the overhead
console and pry it loose.
As the the wiring, there is both a ground and 12VDC hot all the time
in the harness. You can use a R/S phone plug wire (with the 4 wires)
or make your own out of a phone cord line. Use a 12 volt test light
to find the hot and ground.
Takes all of 10 minutes.
Chuck
- 12-25 07:25 PM #4AdamGuest
Re: Install radar dector in 2000 Pathfinder
Chuck.K wrote:
Hi Chuck,
Right on. The console came out just as you described it. I don't have
a 12v tester (although I do have a Radio Shack voltmeter that probably
could do it for me if I knew what to do). Any suggestions on ways to
find out which are the live hot wires, that is, how I can tell which
wire is hot without testing? I'm going to repost this last part.
Thanks again,
Adam
--
To email, erase "forgetit"
- 12-26 03:02 AM #5MikeGuest
Re: Install radar dector in 2000 Pathfinder
I have the V1 myself and it works awesome! It paid for itself many times
already. They definitely work!
"iBuyMinis.Us" <us(remove)> wrote in message
news:IDqGb.21003$gnilink.net...
- 12-26 03:27 AM #6ppointer@nospamindspring.comGuest
Re: Install radar dector in 2000 Pathfinder
iBuyMinis.Us wrote:
Whether someone believes they work or not, I believe we all have a right
to know when we are under random and ambiguous surveillance.
- 12-27 06:20 AM #7Chuck.KGuest
Re: Install radar dector in 2000 Pathfinder
In article <bsfh4n$cpo0j$news.uni-berlin.de>,
net says...
I use the wiring in the plug/socket for the overhead lights. I think
there are only 4 wires up there, but can't recall which is hot and
which is ground. I do remember that if you use a std telephone cord
for the V-1, you have to reverse the red/green (red being ground and
green being hot) for the V-1 to work.
If you have a VOM you should be able to trace which is which. Set the
VOM to DC volts and you're there.
Chuck
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts