no they ended up footing the amount over 200. but i had to basically threaten to sue them. "brian grose" <net> wrote in message...
The nominal voltage is 14.5 V +/- 0.6V. It is never "boosted" to a higher voltage. Rather it is reduced under some circumstance in order to...
On Fri, 16 Jan 2004 21:44:14 GMT, "Aron" <ten> wrote: > If it's speced for DEXRON II/MERCON then shouldn't it operate it's full >operating...
"Steve" <net> wrote in message news:com... > Thanks! I am going to get a lube/filter and grease done and go > to Mobil 1 for it. > > I like...
"'Curly Q. Links'" <com> wrote in message news:com... > I can't connect to one of the best resources on the web!!! > > John Ing's web page is a...
thanks. ill call the mechanic and get the info i need. thanks a bunch! -- Be sure to check out my site @ Http://www.the-c0re.tk. updated daily...
"gary" <inter.net> wrote in message news:com... > I have a '94 Accord Stn. Wagon. I got a new key cut and it was cut > from a blank that is a...
Just to clarify, I didn't find a 1997 manual (All) just a 1997 supplement. I found a 1996 manual (All). So, if I follow you correctly, the 1996...
I meant adamant, stupid spell checker :-P "Aron" <ten> wrote in message news:o8ZNb.10186$news.atl.earthlink.net... > Me aliment and don't...
Likely your pads are worn down and there is uneven wear ion both your pads and rotors. If they're grinding it'll certainly get rougher and rougher....
You're supposed to get continuity between the black wire and ground, you said. If this wire is one of the broken wires you found at that ground on...
You probably figured out already that you in fact put lock-tite on it last time, but for anyone else that's interested it has a regular right hand...
"Jim Yanik" <gov> wrote in message news:117.192.21... > Actually,there may be a resonance chamber on the intake,too.My Integra > has(had)one,I...
Have you checked the trans fluid level?
'90 Prelude Si Cassette (no CD) was 4x20Wrms - the other two Prelude models were 4x12.5Wrms. mimo <com> wrote in message...
Folks, I just couldn't find any time to work on the problem. First it was the holidays, then we went on a vacation, etc. etc. Anyway, I had the...
Thanks for all the replies! I gather from them that a nice example that's done some miles is not to be overlooked. I guess my bad experiences with...
Thanks for the advice. "Dave Dodson" <net> wrote in message news:supernews.com... > > > "LC" <com> wrote in message >...
On 15 Jan 2004 11:57:01 -0800, net (Seven) wrote: >George Macdonald <fammacd=!SPAM^com> wrote in message news:<com>... >> Official Honda service...
"Yuri Nebogatov" <ca> wrote in message news:pKKNb.19239$videotron.net... > thanks for all the suggestions guys, I went with the white grease and it...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules