Reply With QuoteIn article <bay.webtv.net>,
net wrote:
What else could it be???
Crankshaft position sensor
ASD relay
Camshaft position sensor
Broken or worn timing chain or sprockets
Open fusible link
Faulty SBEC
Broken or cracked flex-plate
An open wire
Bad ground
+ Reply to Thread
Results 1 to 6 of 6
Dodge: HELP-91 DODGE,NO SPARK
-
LinkBack
LinkBack URL
About LinkBacks- Bookmark & Share
- Add Thread to del.icio.us
- Tweet this thread
- 01-12 01:23 AM #1wildinohio3@webtv.netGuest
HELP-91 DODGE,NO SPARK
CAN SOMONE PLEASE HELP,I HAVE A 91 DODGE GYNASTY WITH A 3.3 MOTOR,,,I AM
NOT GETTING ANY SPARK TO THE PLUGS,I HAVE REPLACED THE COIL PAC,PLUGS
AND WIRES,,WHAT ELSE COULD IT BE? PLEASE EMAIL ME IF YOU CAN
HELP,,,THANKS
- 01-12 01:56 AM #2aarcuda69062Guest
Re: HELP-91 DODGE,NO SPARK
- 01-12 03:20 AM #3EightupmanGuest
Re: HELP-91 DODGE,NO SPARK
The blown fuel pump fuse on a friends neon caused a no spark condition. I
have an idea why, but to lazy to look into it to be sure
"aarcuda69062" <net> wrote in message
news:news.prodigy.com...
- 01-13 08:18 PM #4wildinohio3@webtv.netGuest
Re: HELP-91 DODGE,NO SPARK
just went and ordered a new ECM i hope that does it
- 01-13 11:09 PM #5SNGuest
Re: HELP-91 DODGE,NO SPARK
<net> wrote in message
news:bay.webtv.net...
Are you sure that the ECM is getting power thru the fusible link? Did you
check pins for power present?
- 01-14 03:51 PM #6JamesGuest
Re: HELP-91 DODGE,NO SPARK
Didn't you try checking for codes by cycling the ign key
(on-off-on-off-on)?
What were the circumstances before it quit running?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts