Jeep: GC key won't work

2001 GC
Key sometimes won't unlock the steering column or start the truck. Acts like
it's the wrong key. Sometimes turning it over works and the column unlocks
and the engine turns over. Most times, the column won't lock, you can turn
the steering wheel even though the key is removed. Tried the spare key with
no luck. Seems random, some times everything works fine, other times it take
a lot of fussing with the key to finally get it to unlock and start.
Any ideas?

GLB

http://www.deepcreekhideaway.com
NC 2 story, 2BR log cabin next to the Smokies

It could be dirt in the ignition lock cylinder. take the collar off the
stiring column, and turnt the key to the on position. you should see a hole
on the lock cylinder with a pin in it. push the pin in with something and
pull the lock cylinder out. spray it real good with wd-40 or similar. if
it doesen't fix the problem, at least id won't cost anything besides a
little time.

Patrick

"Tom H." <nospam*.net> wrote in message
news:glS9e.98981$ops.worldnet.att.net...