Reply With QuotePhilip Marley wrote:
Under bonnet, remove bolt for filler neck and pull filler away.
Remove L/H front wheel and wheel arch liner.
Remove bolts for screen wash bottle and slide it forwards to remove.
Note that if the bottle has crud in it the filter in the pump
will be blocked. Pull the pump out from the seal in the bottle to
clean the filter.
The build up of unpleasant matter in the bottle can be avoided by
using a decent screenwash additive at a reasonably high dilution.
HTH
Chris
--
Remove prejudice to reply
+ Reply to Thread
Results 1 to 4 of 4
Ford Focus: Focus washer bottle
-
LinkBack
LinkBack URL
About LinkBacks- Bookmark & Share
- Add Thread to del.icio.us
- Tweet this thread
- 05-01 11:24 AM #1PhilipGuest
Focus washer bottle
Hello All,
can anyone tell me how to get at the screen wash bottle on my Focus 1.8LX?
I'm getting an awful whiff of rotten eggs inside the car when I use the
washers and a sniff of the washer bottle reveals this as the culprit (What a
stink!!). I'm guessing that it's slimed up inside somewhere and needs a
rinse.
Many thanks in advance.
Phil
- 05-01 11:36 AM #2ChrisGuest
Re: Focus washer bottle
- 05-01 01:56 PM #3PhilipGuest
Re: Focus washer bottle
Thanks Chris,
that's my bank holiday taken care of.
Much appreciated
Phil.
"Chris Whelan" <com> wrote in message
news:cb3de.8991$ntli.net...
- 05-01 03:40 PM #4TheGuest
Re: Focus washer bottle
On Sun, 1 May 2005 12:24:12 +0100, "Philip Marley"
<fsworld.co.uk> wrote:
I would suggest having removed the whole bottle and washed it out.
later,
tom @ www.FreelancingProjects.com
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts