Mazda Miata: Drive train sound
-
Drive train sound
Anybody has had a rubbing sound from their drive train on coming
back on the gas or braking? I first thought it was the exhaust,
but on thinking it over, it is definitely a sound of a rotating
part. I looked at the longitudinal drive axis, but cannot see
anything strange. There is also nothing on the noises page
at miata.net.
Leon
--
Leon van Dommelen
Bozo, the White 96 Sebring Miata .)
To reply to me, the word Miata must be in the subject.
EXIT THE INTERSTATES (Jamie Jensen)
-
Re: Drive train sound
Read SpOck's thread in Miata.net if you haven't already. He has tried
almost everything so far and hasn't figured it out as far as I know. He
thinks it is something in the differential if I recall.
http://forum.miata.net/ubb/ultimatebb.php?ubb=get_topic;f=5;t=033311
"Leon van Dommelen" <net> wrote in message
news:com...
-
Re: Drive train sound
Thanks for the link Mike. It seems very relevant.
Too many people with the mysterious sound problem (including me)
having recent clutch changes. Apparently this all only popped up
when Ford management came up with the new (cheaper?) clutch plates.
I am guessing either the thicker clutch material causes drive train
parts to touch elsewhere, or the clutch "judder" (stutter?) somehow
manages to damage something in the drive train on older miatas.
Anyway, my clutch rebuild will be rebuild with a nonMazda clutch.
Leon
"Mike" <comedy> wrote:
--
Leon van Dommelen
Bozo, the White 96 Sebring Miata .)
To reply to me, the word Miata must be in the subject.
EXIT THE INTERSTATES (Jamie Jensen)
-
Re: Drive train sound
If the sound goes away when the clutch pedal is depressed, try pressing on
the pedal gradually to see where in the pedal travel the noise stops.
I suggest this because I've had throwout bearings make some very odd noises
and the slightest pressure on the pedal can shut them up.
"Leon van Dommelen" <net> wrote in message
news:com...
-
Re: Drive train sound
> I suggest this because I've had throwout bearings make some very odd
noises
I had something like that with the throwout bearing on my '72 2002. If the
construction is similar (several bolts in a circle around a rubber donut)
don't wait to check - it can go suddenly. A bolt or two can loosen and
vibrate if the rubber wears, and everything appears okay.
Gary Fuchs
'99
"Steve Whisman" <msn.com> wrote in message
news:de...
noises
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules