Reply With QuoteIn article <6t_kb.30379$telia.net>,
MaH <com> wrote:
there is a plug (mine is red) at the bottom of the radiator. I believe
it was the left side looking at car.
regards
+ Reply to Thread
Results 1 to 5 of 5
Mercedes-Benz: Cooling system bleeding in 300E
-
LinkBack
LinkBack URL
About LinkBacks- Bookmark & Share
- Add Thread to del.icio.us
- Tweet this thread
- 10-20 11:46 PM #1MaHGuest
Cooling system bleeding in 300E
One spot is the thermostat, but there has to be another place because it
"blurps" when I start the car and the heat is worse than before =/.
--
There are only 10 types of people in the world, those who understand binary
and those who don't
- 10-21 01:23 AM #2GuenterGuest
Re: Cooling system bleeding in 300E
- 10-21 02:08 AM #3IFGuest
Re: Cooling system bleeding in 300E
TEMP sending unit?
unscrew it if it is on the top or close to the top of the motor. air
could be trapped up around the head.
motor OFF !
case
the case, minus a few cans!
- 10-21 02:15 AM #4MaHGuest
Re: Cooling system bleeding in 300E
I was more after getting air OUT of the system, but thanks anyway
(Sorry 'bout the mail.....)
"Guenter Scholz" <uwaterloo.ca> skrev i meddelandet
news:bn21r9$p3r$uwaterloo.ca...
- 10-21 03:47 AM #5MaHGuest
Re: Cooling system bleeding in 300E
I think the blurping is from the heating element in the car.
But I'll try the temp sensor to.
Tnx
"IF YOU CAN'T SWIM DON'T JUMP IN" <net> skrev i
meddelandet
news
ublic.lawson.webtv.net...
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts