Car Audio & Video: Clarion Error Codes Anyone?

http://www.clarion.com/us/en/support/faq/Audio/index.html#ANCHOR3

Simple search on GOOGLE for "Clarion Error Codes"
xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Excerpt below:
Error 3.CD error message. The pick-up is out of focus during play mode due
to scratches on the disc or contamination.
Error 4.Connection problem. Reconnect the data cable.
Error 5.CD error message. Could not read correct data due to CD ROM.
Error 6.CD error message. Could not read data from disc because it is
upside-down

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxx
Full weblink excerpt:

U.S.A.
Products Support Technical Information Company Information Clarion Style
Inquiries Global Site Other Sites in English
--------------------------------------------------------------------------------
HOME Support FAQ Audio
--------------------------------------------------------------------------------

Audio
--------------------------------------------------------------------------------

Q1
CAVW2 INTERFACE QUESTION

Q2
DXZ925/935 Finding Bass & Treble

Q3
ERROR CODES - WHAT DO THEY MEAN?

Q4
How do I change the tuner frequency spacing for use outside the U.S.?

Q5
How do I set the clock?

Q6
How many CD changers can my CeNET source unit control?

Q7
What Clarion radios are Sirius Satellite Radio ready?

Q8
What do the letters in the model number of my Clarion unit mean?

Q9
What is the wiring code for my Clarion unit?

Q10
What remote works with the 1999 and up source units?

Q11
Why can't I access my bass and treble controls?

Q12
Why is the clock on my radio acting like a counter?


Q1
CAVW2 INTERFACE QUESTION

A1
CAVW2 with a RED DOT on the packaging and with only one black wire coming
out of it is the correct piece. This one is compatible all VW MONSOON
systems. We had a few sent out that had two wires coming out of it. One
Yellow and one Black. These units will not work with the MONSOON systems but
will work with NON-MONSOON systems.


Return to the top of the page

Q2
DXZ925/935 Finding Bass & Treble

A2
Accessing the Bass and Treble adjustments:

1.Turn on head unit to any source.
2.Press the "ADJ" button for 1 to 2 seconds, until a submenu will appears on
the display.
3.Press the Right Tuning button until "AC-PII SEL E" appears on the display,
and then press "ENTER."
4. "AC-PII PRO/STD" will appear on the display, using the rotary volume
knob, select either "AC-PII PRO" or " AC-PII STD" mode.
5.Press the Right Tuning button, then "EQ SELECT" will appear on the
display.
6.Use the Rotary Volume knob to select "EQ BAS/TREB," then "ADJ" to save
selection.
7.Press the "EQ" button to access Bass and Treble adjustments and the Rotary
Volume knob to adjust the level. Press the "EQ" button to exit the audio
adjustment mode.


Return to the top of the page

Q3
ERROR CODES - WHAT DO THEY MEAN?

A3
Error 1.Battery inside CD Changer needs to be replaced.
Error 2.CD error message. Mechanism has as eject problem or takes a long
time to select CD.
Error 3.CD error message. The pick-up is out of focus during play mode due
to scratches on the disc or contamination.
Error 4.Connection problem. Reconnect the data cable.
Error 5.CD error message. Could not read correct data due to CD ROM.
Error 6.CD error message. Could not read data from disc because it is
upside-down.
Error 8.Tape Drive system defective. Eating tape or something wrong with the
drive system.
Error 9.Weak RF. Try alternate frequency
NO CD.CD error message. No CD is magazine or no magazine in CD Changer.


Return to the top of the page

Q4
How do I change the tuner frequency spacing for use outside the U.S.?

A4
With our C-Bus units, press and hold the BAND button, and move the Alpha
Touch left or right. With our CeNet units, press and hold the RANDOM button,
and PRESET #1 to change from U.S. to European frequencies. Each press of the
PRESET #1 button will cycle the tuner frequencies.


Return to the top of the page

Q5
How do I set the clock?

A5
There are several methods to set the clock, depending on the model.

Method 1
Press and hold the BAND and DISPLAY buttons to display the clock
Press and hold the BAND and DISPLAY buttons until the time display flashes
SEARCH left to adjust the hours; right to adjust the minutes
Press BAND button to store the time
Method 2
Same as Method 1, except press DISP to store the time
Method 3
Press ADJ
SEARCH left or right to select clock and press ENT
SEARCH left or right to select the hour or minute
Turn rotary knob clockwise or counter-clockwise to set the correct time
Press enter to store the time
Press ADJ to return to the previous mode
Method 4
Press and hold the BAND and FUNCTION buttons to display the clock
Press and hold the BAND and FUNCTION buttons until the display flashes
Search left to adjust hours; right to adjust minutes
Press BAND button to store the time
Method 5
While the display is showing the clock, press and hold the CLOCK knob until
the minutes flash
Press the CLOCK knob to adjust the minutes
When the CLOCK knob is released for 5 seconds, the hours will flash
Press the CLOCK knob to adjust the hours
When the CLOCK knob is released for 5 seconds, the time will be stored


Return to the top of the page

Q6
How many CD changers can my CeNET source unit control?

A6
A total of four changers can be connected to a CeNet source unit. The
CCA-519 Y adapter will connect two changers; one more adapter is required
for each additional changer


Return to the top of the page

Q7
What Clarion radios are Sirius Satellite Radio ready?

A7
All Clarion 2001 Clarion CeNet radios with AUX inputs are Sirius Satellite
Radio ready. They are:
DXZ615
DXZ715
DXZ815MP
HX-D10
AXZ610
VRX610
VRX815
The Joyride source unit is also Sirius Satellite radio ready through it's
AUX input


Return to the top of the page

Q8
What do the letters in the model number of my Clarion unit mean?

A8
R=radio
A=analog or tape
D=digital or CD
V=video
M=MiniDisc
B=base model
X=changer control
Z=CeNet bus


Return to the top of the page

Q9
What is the wiring code for my Clarion unit?

A9
Clarion uses the industry standard wiring colors. Not every unit will have
all of the listed wires

SPEAKERS:
White = Left Front +
White/Black = Left Front -

Gray = Right Front +
Gray/Black = Right Front -

Green = Left Rear +
Green/Black = Left Rear-

Violet = Right Rear +
Violet/Black = Right Rear -

POWER/ACCESSORY:
Yellow 14ga = Battery Main/Memory
Yellow 18ga = Battery CeNET Power/Memory
Red = Accessory (ignition on)
Black = Ground
Blue = Antenna Turn On +
Blue/White = Remote Turn On (amps) +
Orange/White = Dimmer
Brown = Phone Mute
Orange or Mint Green= Parking Brake Video Lockout
White/Red = CCD (camera) input instant on +

RCA Cables:
Gray = Front Output
Black = Rear Output
Purple = Non-Fade or Subwoofer Output


Return to the top of the page

Q10
What remote works with the 1999 and up source units?

A10
Either the full-size RCB130 or the credit card size RCB114


Return to the top of the page

Q11
Why can't I access my bass and treble controls?

A11
The tone controls are automatically disabled if you have our DSP/Crossover
module connected or the Z-Enhancer enabled. If not, press and hold the BAND
and PRESET #3 buttons, or the BAND and RANDOM buttons


Return to the top of the page

Q12
Why is the clock on my radio acting like a counter?

A12
Some units have a timer built-in. It can be disabled by pressing the BAND
and AM buttons


Return to the top of the page

--------------------------------------------------------------------------------
Support
Audio
AutoPC
Marine
Multimedia
NICE General Operation
NICE Music
NICE Navigation
NICE SIRIUS
NICE Video
Source Units
Ungo Security
--------------------------------------------------------------------------------

Privacy Policy Terms of Use Sitemap
"newsonline" <co.uk> wrote in message
news:uaF5h.194134$news.blueyonder.co.uk... 

? > Can anyone help? I'm trying to find out what the error codes mean on an 
NGs 
or 
multichanger, 
would 
[edit]

"BigBob" <B@B.com> wrote in message
news:U386h.304785$.. 
[edit]

Many thanks for the reference Big Bob. An international search for "Clarion
Error Codes" on Google.co.uk results in just three results: one is a broken
link and the other two refer to the Clarion software language. A search on
Clarion-eu.com for 'error codes' results in nothing anywhere as useful as
the US site - just one hit about entering the wrong security code. A more
general search for 'errors' is no more enlightening.

I always assumed that a Google search was a Google search - but clearly that
isn't so. I'll be sure to run a .com and .co.uk search in future.

I'm very grateful for your help with this.

Thanks again
Steve

You're welcome Steve
I LOVE Google
Rob
"newsonline" <co.uk> wrote in message
news:l5l6h.159899$news.blueyonder.co.uk...