Forum: Chevrolet

Hi I'am Parting a 1986 GMC truck.heres what I have for sale check here parts only 305 engine and 350tranny 500.00 and u pull.doors 200.00 each...

I have purchased a 2003 Malibu and it was driving very well. I bought the car a little over three weeks ago. It is a Malibu LS. I commute over 100...

http://makeashorterlink.com/?V1F3230D4

Without breaking them, how do I remove the pushpins that hold a '98 Malibu headlight in place?

So I took apart my front brakes and cleaned all parts; lubed with white lithium grease and put them back together and the grinding noise (more of a...

There's more to this than just a refrigerant swap. The new stuff has 2 very significant differences from the older: - it is less efficient (you...

********************************************************* * This article is posted by an unregistered version of: * Newsgroup AutoPoster PRO...

Anyone who actually believes the "EPA Rated" mileage is being naive. Those numbers are NOT mileage results, they are calculated backwards from...

For more info. Click on the link. http://www.oldsclub.ca/nats.html

http://makeashorterlink.com/?V1F3230D4

"someone" <net> wrote in message news:yApQa.19911$news.prodigy.com... > I know this is a popular topic here.... > Does anyone have a list of GM...

Jim wrote: > Good idea! I will try one last time to get the original off. > > I take it there is no special tools or precautions when working...

I wouldn't be really surprised, since that would vent the pressure in the crankcase -- monitored for crankcase ventilation (hence emission control)...

http://www.carsurvey.org/modelyear_Chevrolet_Malibu_1998.html --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system...

This is not spam mail, please read to the very end. CarDeals Inc. (CarDeals.com) is an established Canadian company with internet presence...

Thanks, will definitely check into these. --------------------- On Thu, 10 Jul 2003 02:02:16 -0400, "Pablo" <net> wrote: >I forgot to add...

look at your exhaust manifold/header, the exhaust rockers "should" be the ones lined up directly over the exhaust ports.

Hi I followed your instructions well except when it came to the push rods. I mixed them up. How can you tell the intake goes and where the exhaust...

I had my daughters changed by a mechanic that works out of his house after hours. He bought the gasket from autozone but returned them because of...