Mercedes-Benz: "check engine" "engine electronics"
-
"check engine" "engine electronics"
I just replaced the glow plugs on a 1998 E300TD using information found
in this newsgroup. Y'all saved me a lot of money and frustration.
Since replacing the GPs, I still get the "check engine" "engine
electronics" messages on the dash display. Does the car's computer need
to be reset or is there perhaps something else wrong?
Thanks so much
pjs
-
Re: "check engine" "engine electronics"
>I just replaced the glow plugs on a 1998 E300TD using information found
You mean they have returned, or they simply persisted? You have to reset a
stored code (with a scanner) or hjave a dealer do it.
Bill Ditmire
Ditmire Motorworks,Inc.
425 White Horse Pike
Absecon,NJ 08201
http://www.ditmire.com
609-641-3392
-
Re: "check engine" "engine electronics"
Bill
Those warnings came on one morning when starting. The dash glow plug
indicator continued to display indicating the real problem was in the GP
system. I replaced the GPs and now the GP indicator does not stay lit.
The other warnings are persisting.
I was hoping there would be a way for me to reset the computer without
losing a day dealing with a dealer.
tnx/pjs
Bill Ditmire wrote:
-
Re: "check engine" "engine electronics"
--- Or disconnect the battery for a minute or so, re-enter the radio code,
then drive the car for a mile or two (to reset things). Sometimes a cold
reset will leave things scrambled at first, ie: the sunroof switch actions
seem reversed, "express" down on the windows will not work, etc. etc but
after driving a mile or two and then turning the car completely off (as in
remove the key), when it is restarted things will once again work and the
databases will continue to be rebuilt.
This will not alter the odometer reading nor the "miles to next service"
count.
--- Or have the dealer reset it.
Paul
--- http://www.astro-nut.com ---
"Bill Ditmire" <com> wrote in message
news:aol.com...
-
Re: "check engine" "engine electronics"
>I was hoping there would be a way for me to reset the computer without
At our shop we usually decode and reset a computer code for free or minimal
charge while the customer waits. Call a couple places in your area and find one
who will do this. We use a Baum CS2000 and Snap-On MODIS systems.
Bill Ditmire
Ditmire Motorworks,Inc.
425 White Horse Pike
Absecon,NJ 08201
http://www.ditmire.com
609-641-3392
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules