Nissan Altima: '98 Altima: Broken window switch while the window is down, HELP

I had the same [problem with my 95. The motors for the windows stop
working. My driver side and rear window (same side) are out. I was
searching on ebay and there are tons of items for sale for the nissan
cares. I found someone offering parts for models 1993, 94, 95, 96, 97, 98,
Nissan Altima GXE Parts. They normally cost 100.00 a piece.

Thats cool, I'll probably pick up a new switch off of there, but I need to
get the window up. I guess I'll just have to rip the door apart and find
the motor and hit it with come current to get the window up.

--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx/nissan-altima/200505/1

$100 for the switch. Man, you Nissan owners are lucky, my car's switchpack
lists for $250. Thankfully I was able to open mine up and fix it since it
wasn't a circuit board type. Just some pivotting copper switches within
it. I did see a brand new switchpack for the Altima listed on an online
stealership for $75 brand new. Just do a google with 'nissan parts' for
that place.

--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx/nissan-altima/200505/1

First I had the same problem few days back, the driver side window went
down but refused to come up. The motor will not make a sound if you hit
the switch up or down, its hard to tell if its switch or motor.

Spent 90$ and the guy told me its switch.

I called local dealer and its $86 for new one. I found that the
switches for 98-2001 are finiky. I would think its better to buy a new
one form Nissan delearship as they would give you warranty + the credit
card can give you additional warranty.

Now, to get your window up, I could not find any schematic or
description of the 12 terminals on the switch anywhere on internet.. so
I think I will not play with it, however I can now tell you how to get
the switch out without opening the door.

- The door has a small slot for handle/conis etc. There is a screw in
there, you can remove it and the cup will come of.
- You can now access the switch and the wire harness connected to it.
- You can remove the harness and pull up for testing.
- To remove switch assembly, you need to reach metal tab toward the
front end and press it to pull up the switch.
- on the side there is a plastic tab, be careful and pull slowly so
that you do not break it.

Hope this helps.


Nathan Ketchel via CarKB.com wrote: 
switchpack 
since it 
within 
online 
for 

"Kmorris" <com> wrote in message
news:talkaboutautos.com... 
Check ebay for "altima window switch" -- I've seen several sold at aroun $40