Reply With QuoteCodes on your 2000 are retrieved using a scan tool plugged into the DLC
(Data Link Connector) under the dashboard - I'm not sure if AutoZone has
scanners that will communicate with the entire network but they're worth a
shot.
There are too many codes to list them all here - all codes will be 5 digit,
one letter (in this case most likely a 'C' but possibly a 'P') followed by 4
numbers.
HTH.
--
Jim Warman
net
"Darrin Gieger" <net> wrote in message
news:google.com...
+ Reply to Thread
Results 1 to 3 of 3
Ford Explorer: 2000 XLT ABS Light
-
LinkBack
LinkBack URL
About LinkBacks- Bookmark & Share
- Add Thread to del.icio.us
- Tweet this thread
- 11-01 07:52 PM #1DarrinGuest
2000 XLT ABS Light
I have a 2000 XLT and the ABS light is always on. I have read through
old posts and found that older models have a diag connector that can
be shorted to get the ABS light to flash the trouble code. I think
the ABS system changed a bit in 97 and I can't find a single wire
connector near the parking brake. Anyone know how to get the trouble
code for a 2000. Have the codes changed also? Can anyone post the
newer ones?
- 11-01 08:10 PM #2JimGuest
Re: 2000 XLT ABS Light
- 11-01 09:24 PM #3DorothyGuest
Re: 2000 XLT ABS Light
Jim Warman wrote:
Had the same trouble, 6 months ago had the lite for a week. The abs were
working OK so I opened
the relay box under the hood, and taped on all the relays a couple
seemed lose when I taped on
the they seem to seat.
started the truck the lite was out., and has not come on since......
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts