GM / General Motors: 2000 LeSabre - Raising and Supporting Vehicle

I need to do a front brake job on my 2000 LeSabre. I see jacking points
along the sides of the vehicle, though I would like to raise the vehicle
from some other point and support the vehicle from these two points, so that
I can pull the rotors and get them machined at the same time. Any
assistance is appreciated. Joe

I generally jack under the steel support bar nder the radiator and put
the jack stands behind the A arms, on that tiny little trace of steel
next to the unibody.

Owners manual may have jacking location points shown.

Good Luck.

=========
Harryface
=========

1991 Pontiac Bonneville LE
~_~_~270,000 miles_~_~_