Chrysler: 1987 Plymouth Voyager 3.0L - Tappets

The tappets that you refer to are hydraulic lash adjusters. They are not
adjustable. Just replaceable. And to note one thing. If you change one you have
to change them all. Or else the one that you changed will wear incorrectly for
some reason. Don't ash me why. I Had to do this two times. The first was done
the improper way and the second, replaced all. Aslo, make sure that your cam
shaft is not worn out of limits as well. A well worn cam shaft will cause the
same effect because the lash adjusters only adjust up to .1 inch.

Just some things to look for and hints from experience.

Wink
93 Lebaron Conv 3.0L

MWinkle353 wrote: 

That statement makes no sense to me (but then, I am an idiot). 8^)

Can someone explain it to me?

Bill Putney
(to reply by e-mail, replace the last letter of the alphabet in my
address with "x")


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

I felt sure the noise coming from underneath the "rocker box" was tappet
noise. However, I have had both boxes off, taken away the lifter system and
examined it ..... everything appears to be OK! I was wondering if the noise
that I hear could be anything else or whether I might be missing something
here.

It is a "tap-tap-tap" noise that increases with engine speed ..... it is
quite loud on idle and gets worse on speed up. Any ideas would be
gratefully received
Thanks in advance
Tony

on one of my friends car, even the timing belt tensior is faulty, he hears
similar sound. It might be the case for you also.

On Mon, 13 Oct 2003, Tony Brennan wrote: